User manual

30D-Link DAP-2553 User Manual
Section 3 - Configuration
Advanced Settings
Performance
*Maximum wireless signal rate derived from IEEE Standard 802.11 specications. Actual data throughput may vary. Network conditions and environmental factors,
including volume of network trafc, building materials and construction, and network overhead can lower actual data throughout rate.
Wireless:
Wireless Mode:
Data Rate*:
Use the drop-down menu to turn the wireless
function On or Off.
The different combination of clients that can
be supported include Mixed 802.11n, 802.11g
and 802.11b, Mixed 802.11g and 802.11b and
802.11n Only in the 2.4 GHz band and Mixed
802.11n and 802.11a, 802.11a only, and
802.11n Only in the 5 GHz band. Please note
that when backwards compatibility is enabled
for legacy (802.11a/g/b) clients, degradation
of 802.11n (draft) wireless performance is
expected.
Indicate the base transfer rate of wireless
adapters on the wireless LAN. The AP will
adjust the base transfer rate depending on
the base rate of the connected device. If there
are obstacles or interference, the AP will step
down the rate. This option is enabled in Mixed
802.11g and 802.11b mode (for 2.4 GHz) and
802.11a Only mode (for 5 GHz). The choices
available are Best (Up to 54), 54, 48, 36, 24,
18, 12, 9, 6 for 5 GHz and Best (Up to 54),
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1 for
2.4 GHz.