User manual
42D-Link DAP-2310 User Manual
Section 3 - Conguration
AP Array
An AP array is a set of devices on a network that are organized into a single group to increase ease of management.
This check box allows the user to enable the AP array
function. The three modes that are available are Master,
Backup Master, and Slave. APs in the same array will use the
same conguration. The conguration will sync the Master
AP to the Slave AP and the Backup Master AP when a Slave
AP and a Backup Master AP join the AP array.
Enter a name for the AP array you have created.
Enter a password that will be used to access the AP array
you have created.
Click this button to initiate a scan of all the available APs
currently on the network.
This table displays the current AP array status for the
following parameters: Array Name, Master IP, MAC, Master,
Backup Master, Slave, and Total.
This table displays all the current array members. The
DAP-2310 AP array feature supports up to eight AP array
members.
Enable Array:
AP Array Name:
AP Array
Password:
Scan AP Array
List:
AP Array List:
Current Array
Members: