User Manual

3D-Link DAP-1665 User Manual
Section 1 - Product Overview
Introduction
D-Link introduces the new D-Link DAP-1665 AC1200 Wi-Fi Range Extender/Access Point. With a maximum combined wireless
signal rate of up to 1200 Mbps
1
, the DAP-1665 expands high-speed wireless network access for your home or oce.
The DAP-1665 is compliant with the latest IEEE 802.11ac standard, which features beamforming and MU-MIMO for better wireless
performance. The DAP-1665 is also backward-compatible with 802.11n/g/b/a devices so older devices can easily integrate into
your network. The access point has the exibility to operate in 7 dierent modes: Access Point, Wi-Fi Client, Bridge, Bridge
with AP, Repeater, WISP Client, and WISP Repeater. Its easy-to-use setup wizard makes sure that you will be connected to
a wireless network in minutes.
The DAP-1665 features Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) to provide an enhanced level of security for wireless data
communications. The DAP-1665 also includes convenience features to keep your wireless connection safe from unauthorized
access. Finally, Wi-Fi Protected Setup (WPS) lets you easily set up your device in any mode by simply pressing a button.
1
Maximum wireless signal rate derived from 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of trac,
building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range. Wireless range
and speed rates are D-Link relative performance measurements based on the wireless range and speed rates of a standard Wireless N product from D-Link.