User Manual

62D-Link DAP-1665 User Manual
Section 3 - Conguration
Dynamic IP (DHCP)
Connection
Type:
Primary DNS
Server:
Secondary DNS
Server:
Management
Link:
Select Dynamic IP to automatically assign an IP address to the
DAP-1665.
Enter the address of the primary DNS server.
Enter the address of the secondary DNS server. This is optional
but will provide backup if the primary server fails.
Enter a custom URL link to access this management interface.
Status:
DHCP IP Address
Range:
DHCP Lease Time:
Always
Broadcast:
UPnP:
IPv4/IPv6
Multicast
Streams:
Click to enable the DHCP server function.
Enter the range of the DHCP address pool from which requesting
clients can be assigned addresses. You should ensure that the
access point’s static IP address is outside of this range in order
to avoid any IP address conicts. Note: Only the last eld is
congurable.
Enter the length of time IP addresses assigned by the server
will be valid for.
Check the box to have the DHCP server always broadcast its
response to clients. This can help to avoid problems when clients
fail to obtain an IP address from the DHCP server.
Enable this to allow universal Plug and Play functionality.
Enable each on to allow multicasting to clients on IPv4/IPv6
networks.
Advanced Settings: