User Manual
47D-Link DAP-1665 User Manual
Section 3 - Conguration
Click to enable the wireless function for the 5 GHz band. If you
do not want to use wireless, uncheck the box to disable all
wireless functions.
Specify a network name (SSID) to identify the 5 GHz network
you want to bridge or leave it empty to scan for your SSID. Click
Add Record to select an SSID in the pop-up window for it to
take eect. The default setting is empty.
Enter a custom password for this network.
Select one of the following:
802.11a Only - Select if you are only using 802.11a wireless
clients.
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11a/n - Select if you are using a mix of 802.11n and
802.11a wireless clients.
802.11ac Only - Select if you are only using 802.11ac wireless
clients.
Mixed 802.11n/ac - Select if you are using a mix of 802.11ac
and 802.11n wireless clients.
Mixed 802.11a/n/ac - Select if you are using a mix of 802.11ac,
802.11n, and 802.11a wireless clients.
Choose a channel from the drop-down list for an existing
wireless network or to reduce interference in congested areas.
Select the channel width:
Auto 20/40 - Select this if you are using both 802.11n and non-
802.11n wireless devices.
Auto 20/40/80 MHz - Select this if you are not using any 802.11n
wireless clients.
Status:
Wi-Fi Name
(SSID):
Password:
802.11 Mode:
Wi-Fi Channel:
Channel Width:
5 GHz Bridge Wi-Fi
Advanced Settings: