User Manual
35D-Link DAP-1665 User Manual
Section 3 - Conguration
Channel
Width:
HT20/40
Coexistence:
Visibility
Status:
WiFi VLAN:
Schedule:
Select the channel width:
Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20 MHz - Select if you are not using any 802.11n wireless clients.
Enable or disable HT20/40 coexistence by toggling the slider.
Enabling this feature helps with device compatibility depending
on their 802.11 version.
Select whether you would like the network name (SSID) of your
wireless network to be Visible or Invisible to wireless clients.
If Invisible, the SSID of the DAP-1665 will not be seen by site
survey utilities, so wireless clients will have to manually enter
the SSID of your wireless network in order to connect to it.
If you have already dened VLAN IDs, you can choose if the
clients accessing the 2.4 or 5 GHz band will be able to see other
clients connected to that VLAN. The default setting is None.
If you have added a rule under Management >> Schedule, click
on the drop-down menu to choose whether the device will be
Always Enable or choose the name of your custom schedule.
Click Save to store the setting and the device will reboot to
activate the selected schedule.
5 GHz Band
Enables the wireless function for the 5 GHz band. If you do not
want to use wireless on this band, disable the slider. You may
also set up a specic time range (schedule).
Specify a network name (SSID) to identify the 5 GHz network.
This is the network name that wireless clients will search for
when connecting to your wireless network. This name should
be dierent to that of the 2.4 GHz network congured above.
Status:
Wi-Fi Name
(SSID):