User Manual

39D-Link DAP-1620 User Manual
Section 3 - Conguration
Save the system settings onto a le to the local hard
drive. You will then see a le dialog where you can select
a location and enter a le name for the conguration le.
Load the system settings from a previously saved le on
the local hard drive.
Restore the system settings to factory default settings.
This will erase all currently stored settings.
Click Reboot to reboot the DAP-1620.
Save Settings To
Local Hard Drive:
Load Settings
From Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot the Device:
System
This page allows you to save or restore your system conguration, reset, or reboot the DAP-1620. To access this page, click the
Management drop-down menu at the top of the page, and select System. Click Save at any time to save the changes you have made
on this page.