User Manual

32D-Link DAP-1620 User Manual
Section 3 - Conguration
Settings
Extender Settings
This page lets you congure the settings for the DAP-1620’s extended wireless network. To access this page, click the Settings drop-
down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
Enable or disable this network by toggling this slider.
This is the name of the DAP-1620’s extended network. If
using Wi-Fi, the DAP-1620 will rebroadcast the uplink router’s
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Select the type of wireless security you wish to use for the
extended network. Choose None or WPA/WPA2 Personal.
Enter the password or network key that you wish to use for
the extended network.
Select Auto or any channel from 1 to 11 for use with this
network.
Select Auto 20/40 or 20 MHz for the bandwidth you wish
this network to use.
Enable this option to reduce interference from other wireless
networks in your area. If the channel width is operating at
40MHz and there is another wireless network’s channel over-
lapping and causing interference, the router will automatically
change to 20MHz.
Status:
Wi-Fi Name
(SSID):
Security:
Password:
Wi-Fi
Channel:
Channel
Width:
HT20/40
Coexistence:
2.4 GHz Extended Wi-Fi
Existing Network
Select the type of existing network, either Ethernet or Wi-Fi
you want the DAP-1620 to connect to.
Existing
Network: