DAP-1610 AC1200 Dual ual Band Wi-Fi Range Rang Extender Quick Install Inst Guide
Package Contents DAP-1610 AC1200 Dual Band Wi-Fi Range Extender Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Before You Begin • For setup, you will want your Range Extender to be plugged in to an available outlet as close to your Wi-Fi Router as possible. Once setup is complete, you can plug it in to an outlet in an area between your Wi-Fi router and where you want improved coverage.
Product Overview Ethernet Port Status LED Reset Button WPS Button Signal Strength Indicator LED Color Status Red Solid Amber Blinking Status LED Solid Green Blinking Description The device is powering on. The device is ready but not connected to a router or access point. Indicates that the range extender is connected to your wireless router or access point. The WPS button has been pushed and the device is establishing a connection.
There are two easy ways to set up your Range Extender. It is recommended that you use Method One. If your router does not have a WPS button ( , ), see Method Two: QRS Mobile Setup, on page 6. Method One: Quick WPS Setup 1 Plug your Range Extender into an available outlet near your wireless router and wait until the Status LED is blinking amber (this may take up to 3 minutes). You can move it to a more suitable location after it is set up.
4 When the Status LED turns solid green (may take up to 3 minutes), this indicates that your Range Extender is connected to your wireless router. You can now unplug and move your Range Extender to a location between your wireless router and the area where you want wireless coverage.
Method Two: QRS Mobile Setup 1 Search for “QRS Mobile” on the App Store or Google Play and download the QRS Mobile App to your iPhone, iPad, or Android device. Do not launch the app until step 4. QRS Mobile App 2 Plug your Range Extender into an available outlet near your wireless router and wait until the Status LED is blinking amber (this may take up to 3 minutes). You can move your Range Extender to a more suitable location after it is set up. 3 You now need to connect to your Range Extender.
5 When prompted to select a Mode, select Repeater (default), then tap Next to continue. Please follow the on-screen instructions to complete the setup. Your setup is complete! To connect your wireless devices to your Range Extender, see Connect Your Wireless Devices, below. Connect Your Wireless Devices 1 From your wireless device go to Wi-Fi Settings to display the available wireless networks.
Troubleshooting Why can’t I connect to my wireless router or my wireless connection drops? 1. Verify that your Range Extender is within range of your wireless router. Try plugging it into a location closer to the router and verify the Status LED is solid green. 2. Note that when extending a wireless signal from a router or access point, devices connected to the Range Extender will not get the same speed/throughput as when connected directly to the router.
Where should I place my Range Extender for best performance? ! Poor Ideal location location ! ! A Range Extender only works as well as the signal it is extending. Therefore, proper placement of your Range Extender is important in achieving desired results. For best performance, place your Range Extender in between your router and your dead zone, making ki sure it is placed in a location where the Wi-Fi signal is still strong. Use the Smart Signal Indicator to help find a location with a strong signal.
What if I forgot my Range Extender’s Admin password or want to reset my Range Extender? 1. If you forgot your Admin password or want to reset your Range Extender back to the factory default settings, press and hold the reset button on the bottom of the extender using a paper clip and release after a minimum of 10 seconds. The Status light will turn red. Note: This process will erase all your settings. 2. Setup your Range Extender using your preferred method.
GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.
Technical Support This guide is for first time configuration. Please refer to the user manual to learn more. U.S. customers can contact D-Link Technical Support through our website. USA http://support.dlink.com/ Version 1.03(US)_90x130 June 21, 2019 ©2019 D-Link. All rights reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries. All other third-party marks mentioned herein may be trademarks of their respective owners.
