Specifications

ManualsBrandsD-Link ManualsComputer equipmentDAP-1562

 FUN 6（DEFINE SOFTKEY－8 KEYS）：Self-defined 8 soft keys

 FUN 7（ENTER SOFTKEY MODE－8 KEYS）：Enter the 8 soft key mode

1. Available for defining 8 soft keys：

、、、、、、、

2. Definable range：R0～R3839、D0～D2943、M0～M1899.

3. In defining M0～M1899, this key can be defined as one of the 5 modes.

Mode Definition Description

0 Set

（S）

Set this contact to 1

1 Reset

（R）

Set this contact to 0

2 Moment

（M）

1 in pressing, 0 in being released

3 Inverse

（I）

Pressing once will have one inverse phase.

4 Monitor

（V）

Monitor this contact

【Example】 Assume definition as R0, definition as M0 mode 0(Set). Once enter the 8 soft key

mode in function 7,

Then pressing

 display address or DOC of R0.

 display

address or DOC of M0 and force M0 ON

Note 1：After defining the 8 soft keys, once function 7 is executed, it will enter 8 soft key operation mode.

And then the 8 soft keys will be executed according to function 6 definitions.

Note 2：In situation of

and with no definition, push either of them will cause DAP returning the

general data access function. Just push to turn back 8/16 soft keys mode.

Note 3：

、

both are allowed out of definition, but the other keys will not be effected without

definition.

Note 4：To return to normal operation mode, press〝

+（D2972 content）+ 〞, among which

D2972 content is from 0000～9999（4 digits required）.

Note 5：When define special key, for optional can push and choose protection or non-protection on

the defined content. (the upper right corner of LCD show that " p " content of monitoring which

shows this special key can only be read and can't be written)

Note 6：Push both

and at one time can transform 8/16 soft keys mode.

 FUN 8（DEFINE SOFTKEY－16 KEYS）：Self-defined 16 soft keys

FUN 9（ENTER SOFTKEY MODE－16 KEYS）：Enter the16 soft keys mode

1. Available for defining 16 soft keys：

、、、、、、～

2. Definable range：T0～T255、C0～C199、R0～R3839、D0～D2943、M0～M1899。

3. In defining M0～M1899, this key can be defined as one of the 5 modes and when a message is being

displayed, if the key is pressed, the display will not be changed.