Operation Manual
67D-Link DAP-1525 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the bridge (192.168.0.50). Click on
Setup and then click Wireless Settings on the left side.
2. Next to Security Mode in the Wireless Security Mode section, select
Enable WPA/WPA2 Wireless Security.
3. Select Auto(TKIP/AES),TKIP,orAES from the Cipher Type drop-
down menu. If you have wireless clients that use both types, use
TKIP/AES.
4. Select EAP from the PSK / EAP drop-down menu
5. Enter the IP Address of your RADIUS server in the RADIUS Server IP
Address eld.
6. Enter the port you are using with your RADIUS server in the Port
eld.
7. Enter the security key in the Shared Secret eld.
8. Click Save Settings at the top of the window to save your settings. If you are conguring the access point with a wireless
adapter, you will lose connectivity until you enable WPA on your adapter and enter the same passphrase as you did on the
access point.
Congure WPA-Enterprise (AP Mode)