Operation Manual

56D-Link DAP-1525 User Manual
Section 3 - Conguration
Save To Local Hard
Drive:
Load From Local Hard
Drive:
Restore To Factory
Default:
Reboot The Device:
Clear Language Pack:
Use this option to save the current access point
conguration settings to a le on the hard disk
of the computer you are using. First, click the
Save button. You will then see a le dialog, where
you can select a location and le name for the
settings.
Use this option to load previously saved access
point configuration settings. First, use the
Browse control to nd a previously save le of
configuration settings. Then, click the Load
button to transfer those settings to the access
point.
This option will restore all conguration settings
back to the settings that were in eect at the
time the access point was shipped from the
factory. Any settings that have not been saved
will be lost, including any rules that you have
created. If you want to save the current access
point conguration settings, use the Save button
above.
Click to reboot the bridge.
Click to clear the language pack. This will put the web UI back to English.
System