Operation Manual
49D-Link DAP-1525 User Manual
Section 3 - Conguration
Enable
Wireless:
Wireless
Network
Name:
Band Width:
Enable:
Security
Mode:
Click the check box to enable the wireless function. If you do not
want to use wireless, uncheck the box to disable all the wireless
functions.
Service Set Identier (SSID) is the name of your wireless network.
Create a name using up to 32 characters. The SSID is case
sensitive.
Select the Band Width:
Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Enable the Wi-Fi Protected Setup feature.
Refer to page 64 for more information regarding wireless security.
Wireless
Wireless MAC Cloning
Enabling this option allows the user to manually assign the
source MAC address to packets forwarded by the DAP-1525. If
not manually assigned, the packet’s source MAC address eld
will be automatically selected as the DAP-1525’s MAC address.
MAC Address:
Scan:
Enter the desired MAC address connected to your
DAP-1525 to enable the clone function.
Click the Scan button to search for all available
devices connected to your DAP-1525’s Ethernet
ports