User manual

27D-Link DAP-1520 User Manual
Section 3 - Conguration
Wi-Fi Settings
This is set to Repeater mode and cannot be changed.
Click Scan to scan for available wireless networks and select
the one you want to use the DAP-1520 to extend.
You can also type in the name (SSID) of the wireless network.
Select the security method that is being used by the wireless
network that you have selected: WEP, WPA/WPA2, or None.
If you selected WEP or WPA/WPA2, you will be required to
enter the password or security key for the network you are
attempting to join.
You can also use WPS to connect your wireless devices to
the DAP-1520’s extended network. For further information
on how to do this, please refer to “Connecting a Wireless
Client” on page 37.
Wireless
Mode:
Wi-Fi Network
Name (SSID):
Security:
Password:
This page lets connect your DAP-1520 to a wireless network. This is the uplink network which the DAP-1520 will then be able
to extend. To access this page, point to the Settings drop-down menu at the top of the page, and select Wi-Fi. Click Save to
save the settings and return to the home page.