User manual
19D-Link DAP-1520 User Manual
Section 3 - Conguration
Once your connection has been established, you can then enter
your desired extended network settings for both 2.4 GHz and 5
GHz networks. Click Next to continue.
Once you have completed the rst time setup, you do not need
to create another SSID. Each time you run the setup wizard you
can choose to either keep or change the current SSID. If the
setup wizard is abandoned on the rst time setup then the SSID
defaults to the DAP-1520 factory setting. The next time you enter
the setup wizard the SSID displayed will be that of the DAP-1520
factory setting. You can still rename this SSID.
WPS Button
You can also use the WPS button on the side of the DAP-1520 to
initiate a WPS connection with the uplink router. After pressing
the WPS button on the DAP-1520, you will have 120 seconds to
press the WPS button on your access point or router. The LED on
the DAP-1520 will turn solid green when a connection has been
successfully established with the uplink router.
Once you have completed the rst time setup, you do not need to create another SSID. Each time you run the setup wizard
you can choose to either keep or change the current SSID.