User manual

15D-Link DAP-1520 User Manual
Section 3 - Conguration
Web-based Conguration
Enter your password. By default, Admin is selected as the username
and cannot be changed, and by default, the password is blank.
To access the conguration utility for the DAP-1520 on your PC,
rst connect to the DAP-1520 wirelessly using the Wi-Fi name
(SSID) and password located on your Wi-Fi Conguration Card.
Then open a web browser and enter http://dlinkap.local./ in
your browser’s URL eld. You may also enter the IP address* of
the DAP-1520. Windows XP users can enter http://dlinkap.
* The default IP address is 192.168.0.50. Once your DAP-1520 connects to
your router, it will be assigned a new IP address based on your network’s
DHCP settings. You will need to log in to your router to see what IP address
was assigned to your DAP-1520.
For multiple DAP-1520s, go to http://dlinkapxxxx.local. as shown on the
included Wi-Fi Conguration Card, with “xxxx” being the last four digits of
the DAP-1520’s MAC address.
The conguration interface will open, and you can congure the
various settings for the DAP-1520. If you have not yet congured
an uplink network, the home screen will show that there is no
connection between the DAP-1520 and the uplink router.
For detailed information on manually setting up your DAP-1520
to extend an existing wireless network, refer to “Using the Manual
Method” on page 21.