User manual
33D-Link DAP-1513 User Manual
Section 4 - Security
Congure WPA/WPA2 Personal
It is recommended to enable encryption on your wireless MediaBridge® before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the MediaBridge®(192.168.0.50).
Click on Setup and then click Wireless Setup on the left side.
2. Next to Security Mode, select WPA Personal.
3. Next to WPA Mode, select Auto WPA or WPA2.
4. Next to Cipher Type, select TKIP or AES.
5. Next to Pre-Shared Key, enter a key. The key is entered as a
passphrase in ASCII format at both ends of the wireless connection.
The passphrase must be between 8-63 characters.
6. Click Save Settings at the top of the window to save your settings.
If you are conguring the MediaBridge® with a wireless adapter, you
will lose connectivity until you enable WPA-PSK on your adapter
and enter the same passphrase as you did on the MediaBridge®.