User manual
61D-Link DAP-1360 User Manual
Section 3 - Configuration
Advanced Network (WISP modes only)
Check this box to use the Universal Plug
and Play (UPnP™) feature. UPnP provides
compatibility with networking equipment,
software and peripherals.
Check this box to allow the WAN port of the
DAP-1360 to be pinged. Unchecking the box
will not allow the DAP-1360 to respond to pings.
Blocking ping response may provide some extra
security from intruders.
Remote management allows the DAP-1360 to be
congured from the Internet by a web browser.
A username and password are still required
to access the Web-Management interface.
In general, only a member of your network
can browse the built-in web pages to perform
Administrator tasks. This feature enables you
to perform Administrator tasks from the remote
(Internet) host.
Enable UPnP:
Enable WAN
Ping Respond:
Remote
Management:
This function is available if the DAP-1360 is in WISP Client Router or WISP Repeater mode. This feature allows you
to change the LAN settings. Please be aware that any changes to the factory default settings may affect the behavior
of your network.