User manual
58D-Link DAP-1360 User Manual
Section 3 - Configuration
Port Filter (WISP modes only)
Check the box to congure a port lter rule.
Enter a name for the rule. You can select an
application name from the Application Name
drop-down menu. Click the << button to ll in
the Name eld with the application name that
you selected.
Enter the port or ports that you want to open. If
you want to open one port, enter the same port
in both boxes.
Select TCP, UDP, or Both.
Port Filter
Rules:
Name:
Start/End Ports:
Traffic Type:
This function is available if your DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature is used
to secure or restrict your local network. It will deny the ports that you enter from the local network to the Internet. Click
Save Settings and the port lter rule will be put into the Port Filter List.