User manual
48D-Link DAP-1360 User Manual
Section 3 - Configuration
WAN Settings
Dynamic IP (DHCP)
WAN settings are only used in the WISP Client Router wireless mode and the WISP Repeater wireless mode. Choose
Dynamic IP(DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does
not give you any IP number to use. This option is commonly used for Cable modem services.
Host Name:
MTU Size:
Attain DNS
Automatically:
Set DNS manually:
DNS Server:
Clone MAC Address:
The Host Name is optional but may be
required by some ISPs.
You may need to change the MTU (Maximum
Transmission Unit) for optimal performance
with your specic ISP. The default MTU size
is 1500.
Select this option if you want the DAP-1360
to get the DNS (Domain Name System)
server IP address automatically.
Select this option if you want to manually
enter the DNS Server IP address(es). The
elds to enter the Primary and Secondary
DNS server IP addresses will appear after you have selected this option.
Enter the Primary and Secondary DNS server IP address assigned by your ISP.
The default MAC address is set to the Ethernet MAC address your DAP-1360. You can click the Clone Your PC’s MAC
Address button to replace the AP’s MAC address with the MAC address of the PC that you used to register with your ISP.
It is not recommended that you change the default MAC address unless required by your ISP.