User manual

44D-Link DAP-1360 User Manual
Section 3 - Configuration
Enable Wireless:
Wireless Mode:
Site Survey:
Wireless Type:
Wireless Network
Name:
Wireless Channel:
802.11 Mode:
Channel Width:
Transmission Rate:
Wireless MAC
Clone:
Wireless Security
Mode:
WPS:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. You may also set up a specic time
range (schedule). Select a schedule from the drop-down
menu or click Add New to create a new schedule.
Select Wireless Client Mode from the drop-down menu.
Click Site Survey to display a list of wireless networks in
your area. You may select the wireless access point to
connect to.
Select Infrastructure if connecting to an access point or
wireless router, or select Ad-Hoc if connecting to another
wireless client.
Enter the SSID of the access point you want to repeat the
signal of. If you do not know for sure, click Site Survey
and select it from the list, if available.
The channel will automatically change to the channel of
the AP you are connected to.
Select the appropriate 802.11 mode based on the wireless
clients in your network. The drop-down menu options are
802.11g Only, Mixed 802.11b/g, 802.11b Only, 802.11n
Only, or Mixed 802.11b/g/n.
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu.
Select the transmission rate. It is strongly suggested to use the Auto setting for optimal performance.
You can clone the wireless MAC address to connect the device.
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual
for a detailed explanation of the wireless security options.
Select enable if you want to congure the DAP-1360 with Wi-Fi Protection setup.
Wireless Client Mode