User manual
15D-Link DAP-1360 User Manual
Section 2 - Installation
Bridge Mode
In the Bridge mode, the DAP-1360 wirelessly connects seperate local area networks (LANs) that can’t easily be
connected together with a cable. For example, if there are two wired LANs separated by a small courtyard, it would be
expensive to bury cables to connect between the two sides together. A better solution is to use two DAP-1360 units
to wirelessly connect the two LANs. In the Bridge mode, both DAP-1360 units do not act as APs.
Note: The Bridge mode is not specied in the Wi-Fi or IEEE standards. This mode will only work using two DAP-1360
units. Communication with other APs (even other D-Link APs) is not guaranteed.
LAN 1 LAN 2
Connecting Two Separate LANs Together Through Two DAP-1360 Units
(Wireless PCs Cannot Access the DAP-1360 Units)