User manual

73D-Link DAP-1360 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wirelessconnectivitybeforeenablingencryption.Yourwirelesssignalmaydegradewhenenablingencryptionduetothe
added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the access point (192.168.0.50). Click
on Setup and then click Wireless Settings on the left side.
2.NexttoSecurity Mode,selectEnable WPA Wireless Security,Enable
WPA2 Wireless Security,orEnable WPA2-Auto Wireless Security.
3.NexttoCipher Mode,selectTKIP,AES,orAuto.
4.NexttoPersonal / Enterprise,selectEnterprise.
5.NexttoRADIUS Server,entertheIPAddressofyourRADIUSserver.
6.NexttoPort,entertheportyouareusingwithyourRADIUSserver.
1812 is the default port.
7.NexttoShared Secret,enterthesecuritykey.
8. Click SaveSettings to save your settings.
Congure WPA/WPA2 Enterprise