User manual

41D-Link DAP-1360 User Manual
Section 3 - Conguration
Enable Wireless:
Wireless Mode:
Site Survey:
Wireless Network
Name:
802.11 Mode:
Wireless Channel:
Enable Auto Scan:
Channel Width:
Visibility Status:
Wireless Security
Mode:
Select this to turn the Wi-Fi module on and o.
Use the drop-down box to selectif you want to
use a schedule. Click Add New to add or change
a schedule.
Select WISP Client or WISP Repeater from the
drop-down menu.
Click this button to choose the root AP from an
available connection list. If the root AP has wireless
encryption, you have to use the same wireless
security mode to connect the root AP.
You can input thewireless networkname of the
root AP or click the SiteSurvey button to nd the
root AP.
Select the appropriate 802.11 mode based
on the wireless clients in your network. The
drop-down menu options are 802.11g Only,Mixed
802.11b/g,802.11b Only,802.11n Only,orMixed
802.11b/g/n.
The channel used will be displayed. The channel
will follow the root AP.
The Auto Channel Scan setting can be selected to allow the DAP-1360 to choose the channel with the least amount of interference.
Select the appropriate channel width between 20MHz or Auto20/40MHz from the drop-down menu.
ChecktheboxifyoudonotwanttheSSIDtobebroadcastbytheDAP-1360.ThispreventstheSSIDfrombeingseenbysitesurvey
utilities,soanywirelessclientswillhavetobepre-conguredwiththeSSIDoftheDAP-1360inordertoconnecttoit.
Selectawirelesssecuritysetting.OptionsareNone,WEP,WPA,orWPA2.RefertotheWireless Security section of this manual for
adetailedexplanationofthewirelesssecurityoptions.
WISP Client Router/WISP Repeater Modes