Operation Manual
57D-Link DAP-1360 User Manual
Section 3 - Conguration
The DAP-1360 is set to Static IP by default.
Select this option if you do not have a DHCP
server on your network, or if you wish to assign
a static IP address to the DAP-1360.
Select this option if you are manually assigning
an IP Address.
LAN Settings
Enter the IP address of the access point.
My LAN
Connection is:
Static IP:
Dynamic IP:
IP Address:
Select this option if you would like to have an
IP Address automatically assigned to the DAP-
1360 by a DHCP server in your network.
Subnet Mask:
Gateway address:
Enter the subnet mask of your access point.
Enter the IP Address of the router in your network.
Device
Name(NetBIOS
Name):
Enable DHCP
Server:
DHCP IP Address
Range Lease Time:
This allows you to congure this device more
easily when your network using TCP/IP protocol.
You can enter the device name of the AP into
your web browser to access the instead of ip
address for conguration.If you are using the device name to connect, ensure that your PC and your DAP-1360 are on
the same network.
Select this to enable the DHCP server if static IP address is selected.
Enter the starting and ending IP addresses for the DHCP server’s IP assignment.
Enter the length of time for the IP address lease.