Operation Manual

53D-Link DAP-1360 User Manual
Section 3 - Conguration
Static IP
Select Static IP if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway
address, and DNS address(es) provided to you by your ISP.
192.168.1.1 is the default WAN IP Address
of the DAP-1360.
IP Address:
255.255.255.0 is the default subnet mask.
All devices on the network must have the
same subnet mask to communicate on the
network.
Subnet Mask:
Enter the IP Address of the gateway
in your network. The default setting is
192.168.1.254.
Default Gateway:
Y o u m a y n e e d t o c h a n g e t h e M T U
(Maximum Transmission Unit) for optimal
performance with your specific ISP. The
default MTU size is 1500.
MTU Size:
Enter the Primary and Secondary DNS (Domain Name System) server IP address assigned by your ISP.
Primary/ Secondary
DNS Server:
This is optional.
Secondary DNS
Server:
The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your
PC's MAC Address button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not
recommended that you change the default MAC address unless required by your ISP.
Clone MAC address: