Operation Manual

46D-Link DAP-1360 User Manual

Section 3 - Conguration

Enable or disable the Wi-Fi protected setup feature.

Locking the wireless security prevents the settings from being changed by any new external registar using its PIN. Devices

can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings

with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager Registar.

Shows the current value of the access point’s PIN.

Create a random number that is a valid PIN. This becomes the access point’s PIN. You can then copy this PIN to the user

interface of the registrar.

Restore the default PIN of the access point.

Resets the Wi-Fi Protected Status to Not Congured. Vista WPS icon will only be displayed when the Wi-Fi Protected Status

is Not Congured.

Wi-Fi Protected

Setup:

Lock Wireless

Security:

Current PIN:

Generate New PIN:

Reset PIN to

Default:

Reset to

Unconﬁgured:

Wireless Security

Mode:

Select a wireless security setting. Options are None, WEP, WPA, WPA2, or WPA2-Auto. See P.75, Wireless Security,

of this manual for a detailed explanation of the wireless security options.

Enable Hidden

Wireless:

Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen

by site survey utilities, so any wireless clients will have to be pre-congured with the SSID of the DAP-1360 in order to

connect to it.

Channel Width:

Select the appropriate channel width between 20MHz or Auto 20/40MHz from the pull-down menu.

Transmission

Rate:

Select the transmission rate. It is strongly suggested to use the Auto setting for optimal performance.