Operation Manual
45D-Link DAP-1360 User Manual
Section 3 - Conguration
Access Point
Wireless Network
Name (also called
the SSID):
The Wireless Network Name is a unique name
that identies a network. All devices on a network
must share the same wireless network name
in order to communicate on the network. If you
decide to change the wireless network name
from the default setting, enter your new wireless
network name in this eld.
Wireless Channel:
Enable Auto
Channel Scan:
Auto channel selection is the default setting. First
disable Auto Channel Scan (see below) and you
will be able to select a wireless channel.
Check the box to enable Auto Channel Scan.
Enable this feature to auto-select the channel
for the best wireless performance.
In the AP mode, the DAP-1360 acts as a central connection point for any computer (client) that has an 802.11n or backward-compatible
802.11b/g wireless network adapter and is within range of the AP.
Wireless Setup
Enable Wireless:
Select this to turn Wi-Fi on and off. Use the drop-
down box to select if you want to use a schedule.
Click Add New to add or change a schedule.
Wireless Mode:
Select the wireless mode from Access Point,
Wireless Client, Repeater, Bridge, Bridge
with AP mode, WISP Client Router and WISP
Repeater.
802.11 Mode:
Select the appropriate 802.11 mode based on the wireless clients in your network. The drop-down menu options are 802.11g
Only, Mixed 802.11b/g, 802.11b Only, 802.11n Only, or Mixed 802.11b/g/n.