Instructions

74D-Link DAP-1360 User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows
®
XP
Windows
®
XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service
Pack 2 users. If you are using another company’s utility or Windows
®
2000,pleaserefertotheusermanualofyourwireless
adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows
®
XP utility as seen below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select ViewAvailable
Wireless Networks.
If you receive the Wireless Networks Detectedbubble,clickon
the center of the bubble to access the utility.
or
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
Ifyougetagoodsignal,butcannotaccesstheInternet,checkyou
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.