Instructions

61D-Link DAP-1360 User Manual
Section 3 - Conguration
Time Zone:
Daylight Saving:
Enable NTP Server:
NTP Server Used:
Date and Time:
Select the Time Zone from the drop-down menu.
ToselectDaylightSavingtimemanually,clickthe
EnableDaylightSavingcheckbox.Nextusethe
drop-down menu to select a Daylight Saving Oset
and then enter a start date and an end date for
daylight saving time.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
ofcomputers.CheckthisboxtouseaNTPserver.
ThiswillonlyconnecttoaserverontheInternet,
not a local server.
Enter the NTP server or select one from the drop-
down menu.
To manuallyinput thetime, enter the values in
theseeldsfortheYear,Month,Day,Hour,Minute,
and Second and then click Save Settings.You
can also click the Copy Your Computer’s Time
Settings button at the bottom of the screen.
Time
TheTimeCongurationoptionallowsyoutocongure,update,andmaintainthecorrecttimeontheinternalsystemclock.
From this section you can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the
time when needed.