Instructions

58D-Link DAP-1360 User Manual
Section 3 - Conguration
Save to Local
Hard Drive:
Upload from
Local Hard Drive:
Restore to
Factory Default:
Reboot the
Device:
Use this option to save the current access point
conguration settings to a le on the hard disk of the
computer you are using. Click the Savebutton.Youwill
then see a le dialog where you can select a location
and le name for the settings.
Use this option to load previously saved access
point conguration settings. Click Browse to nd a
previously saved conguration le.Then, click the
Upload Settings button to transfer those settings to
the access point.
This option will restore all conguration settings back
to the settings that were in eect at the time the access
point was shipped from the factory. Any settings that
havenotbeensavedwillbelost,includinganyrules
that you have created. If you want to save the current
access point configuration settings, use the Save
button above.
Note: Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Congured.
Click to reboot the access point.
System