Instructions

56D-Link DAP-1360 User Manual
Section 3 - Conguration
Advanced Network (WISP modes only)
CheckthisboxtousetheUniversalPlugandPlay
(UPnP™)feature.UPnPprovidescompatibilitywith
networkingequipment,softwareandperipherals.
Check this box to allow theWAN port of the
DAP-1360 to be pinged. Unchecking the box
will not allow the DAP-1360 to respond to pings.
Blockingpingresponsemayprovidesomeextra
security from intruders.
Remote management allows the DAP-1360 to be
congured from the Internet by a web browser. A
username and password are still required to access
theWeb-Managementinterface.Ingeneral,onlya
member of your network can browse the built-in
web pages to perform Administrator tasks. This
feature enables you to perform Administrator
tasks from the remote (Internet) host.
Enable UPnP:
Enable WAN Ping
Respond:
Remote
Management:
This function is available if the DAP-1360 is in WISP Client Router or WISP Repeater mode. This feature allows you to change
the LAN settings. Please be aware that any changes to the factory default settings may aect the behavior of your network.