Instructions

43D-Link DAP-1360 User Manual
Section 3 - Conguration
Static IP
SelectStaticIPifallWANIPinformationisprovidedtoyoubyyourISP.YouwillneedtoenterintheIPaddress,subnetmask,
gatewayaddress,andDNSaddress(es)providedtoyoubyyourISP.
IP Address:
Subnet Mask:
Default Gateway:
MTU Size:
Primary DNS Server:
Secondary DNS Server:
Clone MAC Address:
192.168.1.1 is the default WAN IP Address of
the DAP-1360.
255.255.255.0 is the default subnet mask.
All devices on the network must have the
same subnet mask to communicate on the
network.
Enter the IP Address of the gateway in your
network.
YoumayneedtochangetheMTU(Maximum
Transmission Unit) for optimal performance
with your specic ISP. The default MTU size
is 1500.
Enter the Primary DNS (Domain Name
System) server IP address assigned by your
ISP.
Enter the Secondary DNS (optional) server IP address assigned by your ISP.
ThedefaultMACaddressissettotheMACaddressontheAP(AccessPoint).YoucanclicktheCloneYourPC’sMACAddress
button to replace the AP’s MAC address with the MAC address of your Ethernet card. It is not recommended that you change
the default MAC address unless required by your ISP.