Instructions

40D-Link DAP-1360 User Manual
Section 3 - Conguration
Enable Wireless:
Wireless Mode:
Wireless Network
Name:
802.11 Mode:
Wireless Channel:
Enable Auto Scan:
Channel Width:
Visibility Status:
Remote AP MAC:
Bridge Security:
Select this to turn the Wi-Fi module on and o. Use the
drop-downboxtoselectifyouwanttouseaschedule.
Click Add New to add or change a schedule.
Select Bridge with AP from the drop-down menu.
The Wireless Network Name is a unique name that
identies a network. All devices on a network must
share the same wireless network name in order to
communicate on the network. If you decide to change
thewirelessnetwork name from thedefault setting,
enter your new wireless network name in this eld.
Select the appropriate 802.11 mode based on the
wireless clients in your network. The drop-down menu
options are 802.11g Only,Mixed 802.11b/g,802.11b
Only,802.11n Only,orMixed 802.11b/g/n.
All devices on the network must share the same channel.
The Auto Channel Scan setting can be selected to allow
the DAP-1360 to choose the channel with the least
amount of interference.
Select the appropriate channel width between 20MHz
or Auto20/40MHz from the drop-down menu.
ChecktheboxifyoudonotwanttheSSIDtobebroadcastbytheDAP-1360.ThispreventstheSSIDfrombeingseenbysitesurvey
utilities,soanywirelessclientswillhavetobepre-conguredwiththeSSIDoftheDAP-1360inordertoconnecttoit.
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Select None to disable encryption to across the network. Select WEP 64-bits or WEP 128-bits to limit communication to only those
devices that share the same WEP settings. Select WPA-PSK or WPA2-PSK to secure your network using a password and dynamic key
changes (No RADIUS server required).
Bridge with AP Mode
Note: The Bridge with AP mode is not completely specied in the Wi-Fi or IEEE standards. This mode can work with other DAP-1360 units. Communication with other APs (even other
D-Link APs) is not guaranteed.