Instructions

38D-Link DAP-1360 User Manual
Section 3 - Conguration
Wireless Mode:
Site Survey:
Wireless Type:
Wireless Network
Name:
802.11 Mode:
Wireless Channel:
Enable Auto
Channel Scan:
Channel Width:
Visibility Status:
Wireless MAC
Clone:
Wireless Security
Mode:
WPS:
Select Wireless Client Mode from the drop-down menu.
Click SiteSurvey to display a list of wireless networks in your
area.Youmayselectthewirelessaccesspointtoconnectto.
Select Infrastructure if connecting to an access point or
wireless router, or select Ad-Hoc if connecting to another
wireless client.
Enter the SSID of the access point you want to repeat the signal
of.Ifyoudonotknowforsure,clickSiteSurvey and select it
fromthelist,ifavailable.
Select the appropriate 802.11 mode based on the wireless
clients in your network. The drop-down menu options are
802.11g Only, Mixed 802.11b/g, 802.11b Only, 802.11n
Only,orMixed 802.11b/g/n.
The channel will automatically change to the channel of the
AP you are connected to.
The Auto Channel Scan setting can be selected to allow the
DAP-1360 to choose the channel with the least amount of
interference.
Select the appropriate channel width between 20MHz or Auto
20/40MHz from the drop-down menu.
ChecktheboxifyoudonotwanttheSSIDtobebroadcastbytheDAP-1360.ThispreventstheSSIDfrombeingseenbysitesurvey
utilities,soanywirelessclientswillhavetobepre-conguredwiththeSSIDoftheDAP-1360inordertoconnecttoit.
YoucanclonethewirelessMACaddresstoconnectthedevice.
Select a wireless security setting. Options are None,WEP,WPA,orWPA2. See the Wireless Security section in this manual for a detailed
explanationofthewirelesssecurityoptions.
Select enable if you want to congure the DAP-1360 with Wi-Fi Protection setup.
Wireless Client Mode