Instructions

37D-Link DAP-1360 User Manual
Section 3 - Conguration
Enable Wireless:
Wireless Mode:
Site Survey:
Wireless Network
Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless Channel:
Channel Width:
Visibility Status:
Wireless Security
Mode:
Checktheboxtoenablethewirelessfunction.Ifyoudo
notwanttousewireless,unchecktheboxtodisableall
thewirelessfunctions.Youmayalsosetupaspecictime
range (schedule). Select a schedule from the drop-down
menu or click Add New to create a new schedule.
Select Repeater from the drop-down menu.
Click SiteSurvey to display a list of wireless networks
inyourarea.Youmayselectthewirelessaccesspoint
to connect to.
Enter the SSID of the access point you want to repeat the
signalof.Ifyoudonotknowforsure,clickSiteSurvey
andselectitfromthelist,ifavailable.
Select the appropriate 802.11 mode based on the
wireless clients in your network. The drop-down menu
options are 802.11g Only,Mixed 802.11b/g,802.11b
Only,802.11n Only,orMixed 802.11b/g/n.
The Auto Channel Scan setting can be selected to allow
the DAP-1360 to choose the channel with the least
amount of interference.
The channel will automatically change to the channel of the AP you are connected to.
Select the appropriate channel width between 20MHz or Auto20/40MHz from the drop-down menu.
ChecktheboxifyoudonotwanttheSSIDtobebroadcastbytheDAP-1360.ThispreventstheSSIDfrombeingseenbysitesurvey
utilities,soanywirelessclientswillhavetobepre-conguredwiththeSSIDoftheDAP-1360inordertoconnecttoit.
Select a wireless security setting. Options are None,WEP,WPA,orWPA2. See the Wireless Security section in this manual for a detailed
explanationofthewirelesssecurityoptions.
Repeater Mode