Instructions

35D-Link DAP-1360 User Manual
Section 3 - Conguration
Enable Wireless:
Wireless Mode:
Wireless
Network Name:
802.11 Mode:
Wireless
Channel:
Enable Auto
Channel Scan:
Checktheboxtoenablethewirelessfunction.Ifyou
donotwanttousewireless,unchecktheboxtodisable
allthewirelessfunctions.Youmayalsosetupaspecic
time range (schedule). Select a schedule from the drop-
down menu or click Add New to create a new schedule.
Select Access Point from the drop-down menu.
Whenyouarebrowsingforavailablewirelessnetworks,
this is the name that will appear in the list (unless
VisibilityStatusissettoInvisible,seebelow).Thisname
isalsoreferredtoastheSSID.Forsecuritypurposes,it
is highly recommended to change from the default
network name.
Select one of the following:
802.11b Only - Select if you are only using 802.11b
wireless clients.
802.11g Only - Select if you are only using 802.11g
wireless clients.
802.11n Only - Select if you are only using 802.11n
wireless clients.
Mixed 802.11g and 802.11b - Select if you are using
amixof802.11gand11bwirelessclients.
Mixed 802.11n and 802.11g - Select if you are using
amixof802.11nand11gwirelessclients.
Mixed 802.11n, 802.11g and 802.11b-Selectifyouareusingamixof802.11n,11g,and11bwirelessclients.
IndicatesthechannelsettingfortheDAP-1360.TheChannelcanbechangedtotthechannelsettingforanexistingwirelessnetwork
ortocustomizethewirelessnetwork.IfyouenableAutoChannelScan,thisoptionwillbegrayedout.
The Auto Channel Scan setting can be selected to allow the DAP-1360 to choose the channel with the least amount of interference.
Access Point Mode