Instructions

16D-Link DAP-1360 User Manual
Section 2 - Installation
Bridge Mode
IntheBridgemode,theDAP-1360wirelesslyconnectsseperatelocalareanetworks(LANs)thatcan’teasilybeconnected
togetherwithacable.Forexample,iftherearetwowiredLANsseparatedbyasmallcourtyard,itwouldbeexpensivetobury
cables to connect between the two sides together. A better solution is to use two DAP-1360 units to wirelessly connect the
twoLANs.IntheBridgemode,bothDAP-1360unitsdonotactasAPs.
Note: The Bridge mode is not specified in the Wi-Fi or IEEE standards. This mode will only work using two DAP-1360 units.
Communication with other APs (even other D-Link APs) is not guaranteed.
Connecting Two Separate LANs Together Through Two DAP-1360 Units