Quick Install Guide DAP-1353 RangeBooster N 650 Access Point
System Requirements • Computers with Windows®, Macintosh®, or Linux-based operating systems and an installed Ethernet Adapter • Internet Explorer version 6.0 or Netscape Navigator 7.
Connecting the DAP-1353 to your network A. Connect the power adapter to the receptor on the rear panel of the DAP-1353 and then plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation. B. Using an Ethernet cable, insert one end of the cable to the LAN port on the rear panel of the DAP-1353 and the other end of the cable to a switch. Note: You can also connect the DAP-1353 directly to the computer that will be used for configuration.
Using the Wireless Security Setup Wizard Open your web browser and type http://192.168.0.50 into the URL address box. Press Enter. The login screen will appear: Type admin for the username and leave the password blank.
Your Setup is Complete! After completing the steps in this Quick Install Guide, your DAP-1353 should be integrated into your network: D-Link DAP-1353 Quick Install Guide
Technical Support You can find software updates and user documentation on the D-Link websites. If you require product support, we encourage you to browse our FAQ section on the Web Site before contacting the Support line. We have many FAQ’s which we hope will provide you a speedy resolution for your problem. For Customers within The United Kingdom & Ireland: D-Link UK & Ireland Technical Support over the Internet: http://www.dlink.co.uk ftp://ftp.dlink.co.
