User manual

27D-Link DAP-1320 User Manual
Section 3 - Conguration
Time Zone:
Enable
Daylight
Saving:
Enable NTP
Server:
NTP Server
Used:
Date and Time:
Select your Time Zone from the drop-down menu.
To select Daylight Saving time manually, click the Enable
Daylight Saving check box. Next use the drop-down menu
to select a Daylight Saving Oset and then enter a start date
and an end date for daylight saving time.
NTP is short for Network Time Protocol. Check this box to
use a NTP server. This will only connect to a server on the
Internet, not a local server.
Enter the NTP server or select one from the drop-down menu.
To manually input the time, enter the values in these elds
for the Year, Month, Day, Hour, Minute, and Second and
then click Save Settings. You can also click the Copy Your
Computer’s Time Settings button at the bottom of the
screen to use your computer’s settings.
Time
The Time Conguration page allows you to congure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the
time when needed.