User manual

20D-Link DAP-1320 User Manual
Section 3 - Conguration
Wireless Mode:
Site Survey:
Wi-Fi Network
Name:
Channel Width:
Security Mode:
This will automatically be Repeater Mode.
Scans and displays available Wi-Fi networks.
When you are browsing for available wireless networks, this is the
name that will appear in the list (unless Visibility Status is set to
Invisible, see below). This name is also referred to as the SSID. For
security purposes, it is highly recommended to change from the
default network name.
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both
802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Select WEP or WPA Personal. Refer to page 22.