User manual
8D-Link DAP-1320 User Manual
Section 2 - Installation
Step 5 - To connect your wireless clients to the DAP-1320, use the
Wi-Fi Network SSID and the Wi-Fi Password located on your
conguration note. You may also use WPS to connect your clients
to the DAP-1320 (refer to page 32).
Step 4 - Your AP/Router and DAP-1320 will be connected when the LED
light turns solid green.
Note: If connection fails, try moving your DAP-1320 closer to your wireless
router/access point and repeat steps 2 and 3.
Note: For your wireless client to connect to the DAP-1320, you must use the same Wi-Fi Network Name (SSID) and Wi-Fi password
as your DAP-1320 which is also located on the conguration note. If you would like to change your Wi-Fi Network Name (SSID) and
Wi-Fi password refer to the conguration section page on 18.