User manual
38D-Link DAP-1320 User Manual
Section 4 - Connecting a Wireless Client
Connecting a Wireless Client
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless client.
The easiest and most secure way to connect your wireless devices to the repeater is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or
a software utility with WPS) that you can press to connect to the DAP-1320. Please refer to your user manual for the wireless
device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DAP-1320 for about 1 second. The WPS button will start to blink.
Step 3 - Allow up to 1 minute to conî‚–gure. Once the WPS light stops blinking, you will be connected and your wireless
connection will be secure with WPA2.