User manual

28D-Link DAP-1320 User Manual
Section 3 - Web-based Conguration
Enter the IPv6 address.
Enter the length of the subnet prex.
Enter the default gateway.
Enter the IP address of the primary DNS Server.
Enter the IP address of the secondary DNS Server.
If you selected Static IPv6, you will see the following settings.
You must enter values for all the settings.
If you selected Autoconguration (SLAAC/DHCPv6), you will
see the following settings.
IPv6 Address:
Subnet Prex
Length:
Default
Gateway:
Primary DNS
Server:
Secondary
DNS Server:
You can either choose to obtain IPv6 DNS Servers
automatically, or enter the servers you wish to use.
Enter the primary DNS Server address.
Enter the secondary DNS Server address.
Primary DNS
Server:
Secondary
DNS Server: