User manual

9D-Link DAP-1320 User Manual
Section 2 - Conguration
Setting Up Your DAP-1320
1. Take the DAP-1320 and plug it into a power outlet. Verify
that the power LED has turned blinking amber before
continuing.
There are three ways to congure your DAP-1320 - using the One-
Touch AP conguration method, using the QRS Mobile app on
your smartphone or tablet device, or using the Web GUI on your
computer.
For detailed information on the three methods for conguring
your DAP-1320, refer to the following sections of the manual:
• One-Touch AP Conguration on page 10
• Web-based Conguration on page 11
• QRS Mobile App Conguration on page 12
Outlet
Ethernet