User manual

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Configuring Device (Router Mode)
Figure 68. Configuring PPPoE WAN connection. The expert settings mode. The Ethernet section.
Parameter Description
Connection name A name for connection for easier identification.
Ethernet
MTU The maximum size of units transmitted by the interface.
MAC
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button ( ) to set the
MAC address of the network interface card (of the computer that is
being used to configure the access point at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the access
point's LAN at the moment. To do this, select the relevant value
from the drop-down list (the field will be filled in automatically).
Page 91 of 215