User manual

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Configuring Device (Access Point Mode)
The following buttons are available on the page:
Control Description
Save
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the device's parameters.
Otherwise the changes will be lost upon hardware reboot of the
access point.
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware WPS/RESET button
(see the Saving and Restoring Settings section, page 37).
Backup
Click the button and follow the dialog box appeared to save the
configuration (all settings of the access point) to your PC.
Restore
Click the button to upload a previously saved configuration (all
settings of the access point) from a file on your PC. Click the
Choose/Browse
1
button to select a previously saved
configuration file located on your PC.
Actions of the Save, Factory, and Backup buttons also can be performed via the top-page menu
displayed when the mouse pointer is over the System caption.
1 The name of the button depends upon the web browser that you use.
Page 80 of 215