User manual

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Installation and Connection
9. In the opened window, in the list of available wireless networks, select the wireless network
DAP-1155 and click the Connect button.
Figure 16. The list of available networks.
10. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
Now you can connect to the web-based interface of DAP-1155 for configuring all needed
parameters. To gain access to an external network (to the Internet), you also need to specify the
default gateway and the addresses of DNS servers.
!
If you perform initial configuration of the access point via Wi-Fi connection, note that
immediately after changing the wireless default settings of the access point you will need
to reconfigure the wireless connection using the newly specified settings.
Page 28 of 215