User manual

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Configuring Device (Router Mode)
Firmware Upgrade
On the System / Firmware upgrade page, you can upgrade the firmware of the access point.
!
Upgrade the firmware only when the access point is connected to your PC via a wired
connection.
Figure 160. The System / Firmware upgrade page.
The current version of the access point's firmware is displayed in the Firmware version field
located next the D-Link logo in the top left corner of the page. If you need to install a newer version
of the firmware, follow the next steps:
!
Attention! Do not turn off the access point before the firmware upgrade is completed.
This may cause the device breakdown.
1. Download a new version of the firmware from www.dlink.ru.
2. Click the Choose/Browse
4
button on the System / Firmware upgrade page to locate
the new firmware file.
3. Click the Update button to upgrade the firmware of the access point.
4. Wait until the access point is rebooted (about one and a half or two minutes).
5. Log into the web-based interface using the login (admin) and the current password.
4 The name of the button depends upon the web browser that you use.
Page 206 of 215