User manual

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Configuring Device (Router Mode)
Figure 144. The page for adding a rule for remote management.
You can specify the following parameters:
Parameter Description
IP address
A host or a subnet to which the rule is applied. To choose a device
connected to the access point's LAN at the moment, select the
relevant value from the drop-down list (the field will be filled in
automatically).
Mask The mask of the subnet.
Protocol
The protocol available for remote management of the access point.
Public port An external port of the access point. You can specify only one port.
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete
button.
Page 186 of 215